Payment & Shipping Terms:
|Material:||HDPE||Weight:||230g / Sqm|
|Hole Size:||2 Mm * 2 Mm||Width:||1.0m, 1.2m|
|Length:||50 M / Roll (Customized )||Color:||White , Green, Black , Red|
Vacuum Infusion Mesh , Industrial Plastic Netting , HDPE , Bule Color , 1.2 Meters Wide
1. Description of Production
Vacuum Infusion Mesh is used in resin infusion projects to distribute the resin across and throughout the laminate. The mesh is a "criss cross" pattern of flexible plastic that facilities resin flow ensuring that resin reaches all the parts of the part.
infusion mesh can also be used selectively to increase resin flow to certain areas of the mould and increase the speed with which the project infuses. Infusion mesh can be used in multiple layers where even greater resin flow is required.
Like most other elements of vacuum bagging or resin infusion "stack" infusion mesh cannot be reused once resin has flown through it and therefore should be considered a disposable consumable of the process.
The tight, low profile crisscross pattern of the infusion mesh distributes a controlled, predictable flow of resin throughout the laminate efficiently and with little waste. The resin will flow slightly slower compared to the red infusion mesh.
It is used under high vacuum and can withstand high negative pressure. It is generally used in green colour for better visual clarity of flow of the resin throughout the mould surface. After the resin is cured it is removed from the surface of the mould area.
2. Specification of Production
|Material||PE (With UV)|
|Hole size||2mm * 2mm|
|Weight||200g - 250g / sqm|
|Color||Green, Black, Wihte, Red , Bule (Customized)|
|Reinforcing Rib Quantity||2|
► Wind turbine blades
► The flow and infiltration of resins
► Water and air filter applications
► Fencing screen / garden fencing, temporary and permanent applications
► Vacuum assisted forming of composite materials
► Even hole
► Light weight
► Stable performance
► Allows good air-flow
► Good toughness
► Shock resistance
Contact Person: Mr. Tian